FAQ

  • General
  • 1. What are your opening hours?

    Our offices are open from 08:00 until 17:00 Monday to Friday.

    Our parts department is open from 08:00 until 17:30 Monday to Thursday and 08:00 to 16:30 on a Friday.

  • Technical
  • 1. What are the tyre pressures for a Scarab M25H?

    The recommended tyre pressures for the M25H are as follows:
    Front - 62psi (4.27bar)
    Rear - 79psi (5.44bar)

    Labels are available to be placed on your M25H sweeper. Contact our Parts Department and ask for SCA045523.

  • 2. Technician Training

    Please contact us for Technian Training availabilty.
    Domestic customers – This email address is being protected from spambots. You need JavaScript enabled to view it.
    Export (Distributors) – This email address is being protected from spambots. You need JavaScript enabled to view it.

  • 3. What do the symbols + and - mean on the CANbus panel?

    When the ignition is switched ON a series of + and - will appear on the screen, each representing a node.

    + Indicates Node has been recognised by the CAN,
    - Indicates Node has not been recognised by the CAN

  • 4. What is the best method of greasing front king pins on my Minor?

    The front Axle should be raised off the ground, and placed on axle stands.

    This will ensure the load is taken off the Thrust Bearings before greasing.

  • 5. What type of grease do I use for your brush gear?

    Lithium Grease NLG N°2 should be used to grease the brush gear.

  • 6. Resetting Oil Dilution Counter - Scarab Minor, Azura Euro 5?

    What do I need to reset when I change the engine oil on a Scarab Minor or Azura / Aquazura Euro 5 ?

    resetafteroilchange

  • 7. What type of Gear Oil for Scarab Hydrostatic Box?

    You should use EP80/90 for the Scarab Hydrostatic Gearbox.

  • 8. Which Engine Oil should I use?

    For the Euro 5 engine a 10W40 ACEA E6 is recommended.